Cutters for X91, X93 and X97

Generally a fine-toothed cutter gives the smoothest cut. Difficulties however could arise with feeding when beveling harder or tougher materials, especially if the bevel is deep. In such cases a coarse-toothed cutter has to be used. Cutters with three different Serrations can be supplied with the machine. Compare A, B and C on the picture.

Coarse serration for ¼” to 5/8” bevel width cut: This cutter is recommended when performing maximum dimensions of bevels on large and heavy work pieces.

Medium serration for 3/8” to ¾” bevel width cut: Suitable for large bevels on small work pieces.

Fine serration for ¼” to 5/8” bevel width cut: Advantageous for all materials when the width of the bevel is below 15 mm (0.590″ or 19/32″) and when the weight of the work piece is below 50 kg (110 lbs).

Cutters for X91, X93 & X97 Models

Standard Cutters for Materials up to 80,000psi Tensile Strength

161.505.85 Cutter Fine Serrated
161.504.85 Cutter Medium Serrated
161.503.85 Cutter Coarse Serrated

Cutters for X91, X93 & X97 Models

High Tensile Cutters for Materials From 80,000psi to 100,000psi Tensile Strength

163.704.01 Cutter Fine Serrated - High Tensile
163.703.01 Cutter Medium Serrated - High Tensile
198.724.01 Cutter Medium Serrated - High Tensile: for thin, hard materials like stainless steel- Maximum ½” thickness and Maximum bevel width of ½”.
163.705.01 Cutter Coarse Serrated - High Tensile
198.026.01 Cutter Extra Coarse Serrated - High Tensile: for thin, hard materials like stainless steel- Maximum ½” thickness and Maximum bevel width of ½”

Cutters for X8 and X10 Models

Standard Serrated: This cutter is recommended for all kinds of plate metal above 6 mm (0.240″ or 1/4″) thick but not for pressure vessel steels.

Fine Serrated: This cutter is recommended for all kinds of plate metal between 4 mm (0.160″ or 5/32″) and 10 mm (0.390″ or 3/8″).

Extra Fine Serrated: This cutter is recommended for all kinds of plate metal between 1/8” and ¼” thick.